Alkyd Resins - Alkyd Polyester Resins,Resin Alkyd From Paintsrawmaterials

Alkyd Resins

ORIGIN : MALAYSIA

GRADE : WE CAN SUPPLY ANY TYPE OF ALKYD RESIN AS PER YOUR REQUIREMENT

PACKAGING : 190 kgs drum

INTRODUCTION
Alkyd resins are produced by reacting a polybasic acid (phthalic anhydride, maleic anhydride, etc.) with a polyhydric alcohol (glycerine, pentaerythritol, ethylene glycol, etc.) and an oil or a fatty acid. Originally, alkyd resins were merely the reaction products of phthalic anhydride and glycerine. But these products were too brittle to make satisfactory coatings. The use of oils or unsaturated fatty acids in combination with the brittle alkyds resulted in the air-drying coatings which revolutionized the chemical coating industry. The oil or fatty acid portion of the alkyd is one of the factors which determine the paint formulator's choice of resin to be used. In general, the lower the phthalic content of an alkyd, the higher the amount of oil used. For this reason, low phthalic unmodified alkyds (under 27%) are designated as long oil, medium phthalic alkyds (27-30%) as medium oil and high phthalic alkyds (over 30%) as short oil.

SPECIALITY
Alkyd resin products are suitable for a wide range of paint products with applications in decorative, maintenance and contractor paints where excellent gloss and good durability are required. Medium oil alkyds are easily air dried and are readily soluble in aliphatic solvents. Short oil alkyds are typically oven dried with the solubility limited to aromatic and other non-aliphatic solvents.

»send enquiry

INFORMATION GIVEN ABOVE IS PROVIDED BY OUR EACH PRINCIPLE.

TECHNICAL DATA SHEET

SPECIALITY Oil Type Max Colour (Gardner) N. V.% Viscosity @ 25 ° (Gardner – Hold) OH Value Max Acid Value Recommended Applications

R 7300 Linoleic 6 55 Z+ – Z3+ NA 8 1K Polyurethane Wood Filler

R 7307+ Linseed 8 60 Z1 – Z3 NA 2 1K Polyurethane Wood Filler

R 7320 Linoleic 6 55 Z – Z2 NA 1.5 1K Polyurethane

R 7330 Linoleic 8 70 Z3+ – Z4+ NA 13 1K Polyurethane

R 7333 Linoleic 5 58 X – Y NA 2 1K Polyurethane

R 7388 Linoleic 5 55 U – W NA 2 1K Polyurethane

R 7901 DCO 4 60 Z1 – Z3 NA 14 Baking Enamels Can Coating

R 7903 DCO 12 60 Z1 – Z3 NA 15 Rapid Drying Industrial Paint / Chemical Resistant Enamels / Universal Primer
R 7931 DCO 8 60 X – Y NA 10 Rapid Drying Industrial Paint / Hammer Finishes Baking Enamels

LONG OIL Oil Type Max Colour (Gardner) N. V.% Viscosity @ 25 ° (Gardner – Hold) OH Value Max Acid Value Recommended Applications
R 1001 Linseed 8 99 Z5 – Z6 NA 12 Lithographic Printing
R 1006 Soya 4 80 >Z10 NA 10 Decorative Primer / Undercoat / High Gloss Enamel
R 1012+ Soya 8 70 Z3 – Z4 NA 9.5 Decorative Primer / Undercoat / High Gloss Enamel

R 1046 Soya 8 70 Z6 – Z7 NA 9.5 Decorative Primer / Undercoat / High Gloss Enamel

R 1046 HV Soya 8 70 Z7+ NA 12 Decorative Primer / Undercoat / High Gloss Enamel
R 1047 L Soya 8 70 Z4 – Z5 NA 9.5 Decorative Primer / Undercoat / High Gloss
R 1055 Soya 8 55 U – W NA 11 Decorative Primer / Undercoat / High Gloss Enamel
R 1060 Soya 6 60 Z1 – Z3 NA 10 Decorative Primer / Undercoat / High Gloss Enamel
R 1260 Linseed 8 70 Z1 – Z3 NA 11 Decorative Primer / Undercoat / High Gloss

R 1470 Soya 8 70 Z1 – Z3 NA 11 Decorative Primer / Undercoat / High Gloss Enamel

MEDIUM OIL Oil Type Max Colour (Gardner) N. V.% Viscosity @ 25 ° (Gardner – Hold) OH Value Max Acid Value Recommended Applications

R 3102 Tofa 6 55 Z4 – Z6 NA 12 Automotive Refinishing

R 3103 Linoleic Rich FA 6 50 Z4 – Z5 NA 12 Automotive Refinishing

R 3108+ Soya FA 6 55 Z4 – Z6 NA 10 Automotive Refinishing Road Marking

R 3115 Linoleic Rich FA 6 55 Z6 – Z7 NA 12 Automotive Refinishing

R 3471++ Soya 8 50 V – X NA 14 Decorative Primer / Undercoat High Gloss Enamel

SHORT OIL	OIL TYPE	MAX COLOUR (GARDNER)	N. V.%	VISCOSITY @ 25 ° (GARDNER – HOLD)	OH VALUE	MAX ACID VALUE	RECOMMENDED APPLICATIONS
R 5101	Saturated Fatty Acid	1	70	Z4 – Z6	96	9	Nitrocellulose, Acid Curing 2K Polurethane Baking Enamels
R 5102	Tofa	6	50	X – Z	51	10	Rapid Drying Industrial Paint Hammer Finishes Baking Enamels
R 5103	Tofa	6	60	Z6 – Z6+	51	10	Rapid Drying Industrial Paint Hammer Finishes Baking Enamels
R 5106	Saturated Fatty Acid	100 Alpha	70	Z4+ – Z6+	87	9	Acid Curing 2K Polyurethane
R 5155	Saturated Fatty Acid	1	70	Z1 – Z3	107	9	Acid Curing 2K Polyurethane Baking Enamels
R 5208	Vegetable Fatty Acid	1	70	Z5 – Z7	136	8	Acid Curing Baking Enamels
R 5222	Coconut	3	60	Z1 – Z3	156	10	Nitrocellulose
R 5222 SM	Coconut	3	60	Z2 – Z4	100	10	Can Coating
R 5224	Tofa	6	60	Z3 – Z5	110	10	Baking Enamels
R 5227	Tofa	7	70	Z6 – Z7+	115	7	Nitrocellulose
R 5233	Mixed Vege. Oil	5	70	Z7+	175	8	Nitrocellulose Baking Enamels
R 5236	Linoleic Rich FA	6	60	Z5 – Z7	150	9	Nitrocellulose Acid Curing
R 5246	Coconut	1	60	Z1 – Z3	150	9	Nitrocellulose Baking Enamels
R 5247	Coconut	220 Alpha	70	Z7+	150	8	Acid Curing
R 5270	Mixed Vege. Oil	5	70	Z5 – Z7	150	10	Nitrocellulose Acid Curing Baking Enamels

» send enquiry

Home | Profile | Product Range | Contact Us | Enquiry

	Alkyd Resins Anti Corrosive Chrome Pigments BSS Castor Oil (F.S.G. or B.S.S.) Bentone 920 Chlorinated Rubber Colorants Cuprous Oxide Cekol 2000 Celflow (Hydroxy Ethyl Cellulose) Diacetone Alcohol Epoxy Resin Finnfix 50000 (Carboxy Methyl Cellulose) Glass Beads - Coated Grinding Machinery Hydrocarbon/Petroleum Resins Hydrogenated Castor Oil (H.C.O.) Inorganic Chrome Pigments Isophorone Maleic Resins Opaque Polymer Organic Pigment Powder Organic Pigment Paste Pentaerythritol Penta Ester Gum Phenolic Resins Polygloss 90 Polyamide Resin Refined Glycerine Thermoplastic Acrylic Resins Tinting Machineries & Mixers Zinc Di-Organo Dithiophosphate (ZDDP) Zinc Dust Zinc Phosphate Zeolex 323 Sodium Alumino Silicate (Precipitated Amorphous Silicate) Zeolex 325 Magnesium Alumino Silicate (Precipitated Amorphous Silicate) Zinc Dross Zinc Oxide Kelzan (Xanthan Gum) Pressure Vessel Vaccum Mixing Vessel Reactors And Mixing Vessels Automatic Liquid Filling Machines-Coatings filling line Hydraulic Three Rolls Mills Industrial Basket Mills - High-Powder Basket Mill (with CE marking) Mixers For Highly Viscous Material - Horizontal Mixer Planetary Mixers – Paddle Planetary Mixer Series Powder Packaging Machines-Powders filling machine Semi-Automatic Liquid Filling Machines Storage Tanks - 5000L Mixing Vessel Superpower Disperser - 175W High Speed Didpersing Machine (CE Marking) Superpower Horizontal Sand Mills

SPECIALITY	Oil Type	Max Colour (Gardner)	N. V.%	Viscosity @ 25 ° (Gardner – Hold)	OH Value	Max Acid Value	Recommended Applications
R 7300	Linoleic	6	55	Z+ – Z3+	NA	8	1K Polyurethane Wood Filler
R 7307+	Linseed	8	60	Z1 – Z3	NA	2	1K Polyurethane Wood Filler
R 7320	Linoleic	6	55	Z – Z2	NA	1.5	1K Polyurethane
R 7330	Linoleic	8	70	Z3+ – Z4+	NA	13	1K Polyurethane
R 7333	Linoleic	5	58	X – Y	NA	2	1K Polyurethane
R 7388	Linoleic	5	55	U – W	NA	2	1K Polyurethane
R 7901	DCO	4	60	Z1 – Z3	NA	14	Baking Enamels Can Coating
R 7903	DCO	12	60	Z1 – Z3	NA	15	Rapid Drying Industrial Paint / Chemical Resistant Enamels / Universal Primer
R 7931	DCO	8	60	X – Y	NA	10	Rapid Drying Industrial Paint / Hammer Finishes Baking Enamels

LONG OIL	Oil Type	Max Colour (Gardner)	N. V.%	Viscosity @ 25 ° (Gardner – Hold)	OH Value	Max Acid Value	Recommended Applications
R 1001	Linseed	8	99	Z5 – Z6	NA	12	Lithographic Printing
R 1006	Soya	4	80	>Z10	NA	10	Decorative Primer / Undercoat / High Gloss Enamel
R 1012+	Soya	8	70	Z3 – Z4	NA	9.5	Decorative Primer / Undercoat / High Gloss Enamel
R 1046	Soya	8	70	Z6 – Z7	NA	9.5	Decorative Primer / Undercoat / High Gloss Enamel
R 1046 HV	Soya	8	70	Z7+	NA	12	Decorative Primer / Undercoat / High Gloss Enamel
R 1047 L	Soya	8	70	Z4 – Z5	NA	9.5	Decorative Primer / Undercoat / High Gloss
R 1055	Soya	8	55	U – W	NA	11	Decorative Primer / Undercoat / High Gloss Enamel
R 1060	Soya	6	60	Z1 – Z3	NA	10	Decorative Primer / Undercoat / High Gloss Enamel
R 1260	Linseed	8	70	Z1 – Z3	NA	11	Decorative Primer / Undercoat / High Gloss
R 1470	Soya	8	70	Z1 – Z3	NA	11	Decorative Primer / Undercoat / High Gloss Enamel

MEDIUM OIL	Oil Type	Max Colour (Gardner)	N. V.%	Viscosity @ 25 ° (Gardner – Hold)	OH Value	Max Acid Value	Recommended Applications
R 3102	Tofa	6	55	Z4 – Z6	NA	12	Automotive Refinishing
R 3103	Linoleic Rich FA	6	50	Z4 – Z5	NA	12	Automotive Refinishing
R 3108+	Soya FA	6	55	Z4 – Z6	NA	10	Automotive Refinishing Road Marking
R 3115	Linoleic Rich FA	6	55	Z6 – Z7	NA	12	Automotive Refinishing
R 3471++	Soya	8	50	V – X	NA	14	Decorative Primer / Undercoat High Gloss Enamel